Inheco單板培養箱搖床、孵育器、單板培養箱振蕩器、Inheco孵化機搖床、培養箱

Inheco單板培養箱搖床、孵育器、單板培養箱振蕩器、Inheco孵化機搖床、培養箱

出色的加熱、振蕩和細胞培養保護

增加自動化細胞培養培養的產量，而不占用寶貴的臺面空間。Inheco單板培養箱振蕩器體積小，功能多，可快速達到工作溫度。
孵育器搖動器允許您同時孵育和搖動(或搖動)樣品。這對貼壁細胞培養很重要，當懸浮細胞需要運動以防止它們粘附到底部或鄰近細胞，加上生長所需的熱量。因?yàn)椴恍枰蜷_(kāi)培養箱并轉移樣品進行搖動，所以在整個過程中可以保持樣品的溫度，并且避免了光照和污染。實驗室選擇Inheco的單板培養箱振蕩器，其軟件和驗證工具的多功能性和精確性。

節省空間
不需要培養箱和搖床。Inheco孵化機搖床可以放在甲板上或甲板下，以節省空間。它通過自己的內部控制器進行調節。其自動打開和關閉的門將樣品板移出，即使只有該部分伸入液體處理平臺的工作區域，也能實現甲板上的自動化應用。

快速、準確、適應性強
Inheco單板培養箱搖床在10分鐘內達到其工作溫度。為了向您提供高度精確的分析，我們的培養箱可在最高80°C的溫度下運行，溫度精度為0.3 K，均勻度為0.5 K。我們的培養箱搖動器型號可實現高達1800 rpm的低振動搖動。自由可編程搖動模式包括直線、軌道、橢圓和8字形。搖動頻率和搖動幅度也可以自由調節。

多才多藝的
微孔板有兩種型號可供選擇:僅從底部加熱，適用于有蓋微孔板；深孔:從各個方向加熱，以避免冷凝，適用于樣品瓶和容器。為了獲得更大的靈活性，可以將兩個或更多版本堆疊在一起。所有這些都在149毫米x 268毫米的工作站空間內。放置在最適合您的設置的位置–您可以將保育箱搖動器放置在不同的方向，以便于插入和取出孔板，并且無需從抽屜中取出孔板即可完成移液。

易于集成
API可用，并且已經與主要液體處理系統集成。對于堆疊設備，設備是單獨和獨立控制的(主從原則)。

可靠且受支持
每臺Inheco設備均在德國設計、制造，并在交付前經過嚴格的質量控制。它附帶一個全球性的兩年期保證而且滿了客戶服務包括遠程支持、診斷和服務選項，旨在最大限度地減少操作停機時間。

Technical Specifications Incubator Shaker

Incubator typeSingle Plate Incubator Shaker MPSingle Plate Incubator Shaker DWP
Input voltage24 Vdc
Input powerMax 50 WMax 60 W
Maximum numbers of devices per pow-er supply (2400121)33
Temperature rangeRT +5 K, RT +10 K (for shaking longer than for 1 hour) up to +80 °C (+175 °F)
Tolerable realtive humidity ambient10-80% relative at +20 °C (+68 °F) up to +30 °C (+86 °F)
Maximum load of the shaker platform250 g
Shaker frequency range6.6 Hz to 30 HZ → 400 rpm to 1800 rpm
Maximum shaking amplitude (difference between the maxima)3 mm
Shaking directionArbitrary programmable: e.g. orbital / linear
Dimension in YModule?w connector cable295.5 mm
Dimension in YModule?wo connector cable268.5 mm
Dimension in XModule149 mm
Dimension in ZModule?wo pin88,5 mm139 mm
Open drawer incl. door YDrawer209 mm239 mm
Dimension of the thermal chamber in ZChamber18 mm53 mm
Weigth4.5 kg5.4 kg
Maximum Number of devices in one stack due to interaction during shaking and power limitation of power supply32
Drawer specifications
Accuracy of the end position of the drawer in x, y and z (drawer open); single unit, all parts at specified ambient temperature±0,30 mm
Maximum drawer load0,25 kg
Open drawer resistance for a force in Z-axis without plastic deformation10 N
Environmental conditions
Tolerable relative humidity:
Operation10-80% relative at +20 °C (+68 °F) up to +30 °C (+86 °F)
Transportation and storage-10 °C to +60 °C (+14 °F to +140 °F)
Temperature:
Operation+20 °C to + 30 °C (+68 °F to +86 °F)
Transportation and storage10 °C to + 60 °C (+14 °F) to 140 °F)

Shaker functionality Incubator Shaker MP / DWP

ParameterValue
Amplitude range0.0 – 3.0 mm *
Speed range6.6 – 30.0 Hz *
Speed precision±2 Hz
Load40 – 250 g * (weight of plate and liquid and adapter)
Supervisionspeed and amplitude (closed loop controller)
Shaker movementNorth – South (linear)
East – West (linear)
Round (orbital)
“Eight” (this is possible but not recommended because it might damage the shaker)
Shaker movement
Amplitude accuracy** ±20% (of the target amplitude)
Phase shift accuracy** ±11 °
** Validated for the Heating Plate movement / average value over 10 cycles
Single Axis (North – South and East – West) shaker load: 100 g
ShakerShaker amplitude [mm]
Speed [Hz]Single deviceMaximum stack
10X = 1.0 to 2.2 or Y = 1.0 to 2.2X = 1,0 to 1.9 or Y = 1.0 to 1.9
15X = 1.0 to 2.7 or Y = 1.0 to 2.7X = 1.0 to 2.4 or Y = 1,0 to 2.4
20X = 1,0 to 1.2 or Y = 1.0 to 1.2X = 1.0 to 1.2 or Y= 1.0 to 1.2
Round (phase shift = 90 °)shaker load: 100 g
Shakershaker amplitude [mm]
Speed [Hz]Single deviceMaximum stack
10X = 1.0 to 2.2
Y = 1.0 to 2.2		X = 1,0 to 1.9
Y = 1.0 to 1.9
15X = 1.0 to 2.7
Y = 1.0 to 2.7		X = 1.0 to 2.4
Y = 1.0 to 2.4
20X = 1.0 to 1.2
Y = 1.0 to 1.2		X = 1.0 to 1.2
Y = 1.0 to 1.2
?Eight“ (Phase shift = 0 °)Shaker Load: 100 g
ShakerShaker amplitude [mm]
Speed [Hz]Single deviceTriple stack
X = 12 / Y = 24X = 1.0 to 2.4 / Y = 1.0 to 2.4X = 1.0 to 2.2 / Y = 1.0 to 2.2
X = 15 / Y = 30X = 1.0 / Y = 1.0X = 1.0 / Y = 1.0
* For detailed shaker performance, see chapter below.

Thermal functionality for all Incubators

ParameterValue
Temperature rangeRoom Temperature plus 5 K to +80 °C [+176 °F]
Accuracy absolute (@ ambient temperature stability ±1K)The accuracy is defined as the difference between the target temperature of the heating plate and the average of the measured temperature on the heating plate. The heating plate temperature is measured at 5 positions on the heating plate according to the Inheco measurement head PM-0105. The 5 measurement positions are according to the Plate positions A1, H1, E6, A12 and H12.

Target temp. validation toolAccuracy [°C] for all incubator
+37 °C [+98,6 °F]± 1.0
+60 °C [+140 °F]± 1.5
+80 °C [+176 °F] (temperatures higher than +60 °C reduces the uniformity over the labware)± 2.0
Uniformity measured in wellUniformity is defined by the maximum difference between lowest and highest temperature according to a Greiner 96 Flat Bottom Plate (Postitions A1, A12, E7, H12)

Target temp. validation toolUniformity [°C] for non shaking devicesUniformity [°C] for shaking devices
+37 °C [+98,6 °F]≤ 0.8≤ 0.8
Evaporation in unsealed Micro Plates (can be reduced by using lid or cover)
Incubator?non?shaker temperature +37 °C [+98,6 °F],?max. 25% loss?of liquid in?4 h, deionized water, room temperature 24-26 °C [75,2-78,8 °F], rel. humidity 40-50%, altitude at 410 m over Sea levelIncubator shaker temperature +37 °C [+98,6 °F],?max. 32% loss?of liquid in?4 h, deionized water, room temperature 24-26 °C [75,2-78,8 °F], rel. humidity 40-50%, altitude at 410 m over Sea level
Heatup time at start temperature +20 °C [+68 °F] with target temperature +37 °C [+98 °F]
Max. 30 min; Volume 280 μl per well. *Max.100 min; Volume 1.5 ml per well.?**Max. 30 min; Volume 280 μl per well.?*Max. 120 min; Volume 1.5 ml per well.?**
* The target temperature is reached when all sensors are in the tolerance band of 37 °C ±1 °C [98,6 °F ±3,6 °F] Measured with: 1)?Greiner 96 Flat Bottom Plate

** The target temperature is reached when all sensors are in the tolerance band of 37 °C ±1 °C [98,6 °F ±3,6 °F] Measured with: 1)?NUNC 96 Deep Well Plate

獨特的搖動器驅動提供更多模式選擇

振動篩驅動
Inheco保育箱搖動器使用基于雙軸鐘擺式擺動系統的獨特?fù)u動器驅動。

由于每個軸都是獨立移動的，因此可以通過疊加x軸和y軸移動來控制最終的抖動曲線。這為要編程的搖動曲線提供了廣泛的選擇，包括線性、圓形、橢圓形、8字形和利薩如圖形。

Inheco培養箱搖動器驅動允許最佳的搖動曲線選擇，顯著降低產品的結構振動。

直接接觸加熱，溫度提升，以獲得最佳加熱速率

加熱
微孔板(MP)變體使用底部接觸表面加熱。樣品在大約20分鐘內從20°C加熱到37°C。

深孔板(DWP)變體從室內的各個方向加熱，以避免孵化過程中的冷凝。樣品在大約10分鐘內從20℃加熱到37℃，比傳統恒溫箱快4倍。

軟件

  • 可用API。Inheco單板培養箱振蕩器可快速連接，并為您實驗室的未來發展做好準備。

Related posts